REMOVE/INSTALL PILOT LIGHT SOCKET

TM 5-4110-240-13&P

REMOVE/INSTALL PILOT LIGHT SOCKET

TOOLS: Screwdriver, flat-blade

NOTE

PRELIMINARY PROCEDURE: Pilot light cover removal (page 4-25).

REMOVAL:

WARNING

Disconnect power to power receptacle before beginning this procedure.

1. Remove two screws (1) and gently pull socket (2) away from wall.

2. Tag and disconnect wires (3) to socket.

INSTALLATION:

1. Connect wires (3) to rear of socket and remove wire tags.

2. Position socket (2) into wall and secure with screws (1).

3. Reconnect power to power receptacle.

NOTE

FOLLOW-ON MAINTENANCE: Install pilot light cover (page 4-25).

4-27