|
| |
Figure 5-11. Pressure regulator valves.
5-32. Accumulator
housing top covers. Refer to paragraph 4-18 and
a. Removal. Remove the accumulator (fig. 5-12)
remove air inlet louver.
as follows:
(3) Remove nut and lock washer from stud on
(1) Refer to paragraph 6-3 and discharge the
bottom of accumulator.
refrigerant system.
(4) Disconnect piping as required and remove
(2) Refer to paragraph 4-21 and remove
elbow from top of accumulator.
5-16
|
