|
| |
Figure 5-12. Accumulator.
b. Installation. Install the accumulator as
(4) Refer to paragraph 6-3 and charge the
follows :
refrigerant system.
(1) Install accumulator (fig. 5-12) with stud
through hole in bottom of evaporator compartment
5-33. Motors
of the housing. Install lock washer and nut on stud.
Refer to paragraph 4-38 for removal of motors and
(2) Install elbows and connect elbows and
to paragraph 4-40 for installation.
piping.
5-34. Control Module
(3) Install evaporator air inlet louver (para. 4-
Refer to paragraph 4-44 for removal of control
18) and housing top covers (para 4-21).
module and to paragraph 4-48 for installation
5-17
|
