Fuses - TM-5-4120-274-150047

TM 5-4120-274-15

c. Installation. Install fuse in fuse holder. Re-

b. Installation. Refer to figure 3-12 and install

junction box.

3-34. Transformer

3-33. Fuses

a. Removal. Refer to figure 3-12 and remove

fuses from holders located in junction box.

b. Inspection and Testing.

(1) Inspect for broken or cracked case and

(1) Inspect for cracked or broken case.

broken or damaged contacts.

(2) Test for continuity through both pri-

(2) Test for continuity through fuse with

mary and secondary sides with multimeter set on

multimeter set on OHMS. Refer to the wiring

OHMS. Refer to wiring diagram figure 1-5 to

diagram figure 1-5 to establish points of conti-

nuity.

establish points of continuity.

Figure 3-12 Junction box, fuses, rectifier, time delay relay, terminal boad, heater

relay, compressor relay, circuit breaker and phase sequence relay, removal and

installation.

3-15