Condenser

c. Clean the fins of the evaporator assembly thoroughly with com-

pressed air umder low pressure. Direct the air through the coil from

front to rear.

CAUTION

Use only compressed air to clean fins. Brushing or other

methods of cleaning may cause damage to fins which could im-

pair operation.

Install front panel (para 39).

e. Install filter (para 28).

Install panels.

Condenser (fig. 4)

Remove left-side and rear panels (para 39).

b. Clean the dust and dirt from the fins of the condenser assembly

with compressed air under low pressure. Direct the air stream from the

rear of the unit.

CAUTION

Use only compressed air to clean fins. Brushing or other

methods of cleaning may cause damage to fins which could im-

pair operation.

c. Install

left-side and rear panels (para 39).

Main Power Cable Repair

a. Remove male Power Plug.

(2) Loosen three wire retainer screws.

(3) Remove plug.

Remove Female Power Receptacle.

(1) Remove 3 retainer screws from Plug.

(2) Seperate plug.

(3) Remove cable end from plug.

c. Install new or repaired cable in male plug by stripping ends and

wrapping around screws.