Evaporator Intake Grille

TM 5-4120-339-14

(2) Cleaning. Clean panels with a damp cloth and dry thoroughly.

(3) Inspection.

(a) Inspect panels for bends, dents and other damage.

(b) Inspect for missing, damaged and loose insulation and gaskets.

(4) Repair.

(a) Straighten minor dents and bends in panels.

(b) Replace damaged or missing insulation with new insulation.

(d) Replace defective or missing gaskets. New gaskets are installed by removing the strip from the

gasket adhesive backing and pressing the gasket in place.

(e) Replace missing or defective attaching hardware.

(5) Replace. Replace panels which are damaged beyond repair.

(6) Installation. (See figure 3-3.)

d. Evaporator Intake Grille.

(1) Removal. (See figure 3-3.)

(2) Cleaning. Clean grille with a damp cloth and dry thoroughly.

(3) Inspection.

(a) Inspect grille for bent, dented or broken parts.

(b) Inspect for missing, damaged or loose insulation and gaskets.

(4) Adjust. Operate damper lever to make sure that louvers open and fully close without sticking or binding.

(5) Repair.

(a) Straighten minor bends and dents in grille.

(b) Replace damaged or missing insulation with new insulation.

(d) Replace defective or missing gaskets. New gaskets are installed by removing the strip from the

gasket adhesive backing and pressing the gasket into place.

(e) Replace missing or defective attaching hardware.

(6) Replace. If grille is damaged beyond repair, or if louvers do not operate properly and cannot be repaired,

replace grille.

(7) Installation. (See figure 3-3.)

3-11