Section II. SERVICE UPON RECEIPT OF EQUIPMENT

TM5-4120-347-14

National Stock Number

Description

Brush, Bristle

Brush, Wire

Bucket

Heat Gun

5120-00-268-3579

Pliers, Long Round Nose

8415-00-266-8677

Rubber Gloves

4240-00-052-3776

Safety GoggIes

5120-00-227-7293

Screwdriver, Cross Tip

No. 2 One Inch Long

Blade

5120-00-256-9014

Screwdriver, Offset, Cross

Tip No. 1

Section II.

SERVICE UPON RECEIPT OF EQUIPMENT

4-2.

UNLOADING

The Model F9000H-3 Air Conditioner is packaged in a container designed for shipment and handling with

the cabinet in an upright position. The base of the container is constructed as a shipping pallet with provisions

for the insertion of the tongs of a fork on materials handling equipment.

a. Remove all blocking and tiedowns that may have been used to secure the container to the carrier.

b. Use a forklift truck or other suitable material handling equipment to remove the packaged unit from the

carrier.

Use care in handling to avoid damage to the air conditioner. If an overhead lifting device must be

used, use an appropriate sling so that the weight of the unit is borne by the base of the shipping

container.

4-3.

UNPACKING

a. General. Normally, the packaged air conditioner should be moved into the immediate area in which it is

to be installed before it is unpacked.

NOTE

The shipping container is of such a design that it may be retained for reuse for mobility purposes if

frequent relocation of the air conditioner is anticipated.

b. Remove Shipping Container. Cut the metal bands that hold the top and sides of the container to the base.

Lift the container vertically and remove it from the base and cabinet.

4-2