 |
|||
|
|
|||
|
Page Title:
Figure 3-15. Removal and installation of relays (sheet 1 of 2) |
|
||
| ||||||||||
|
|
 TM 5-4120-356-14
REMOVAL OF BRACKET
REMOVE EIGHT SCREWS (1) AND WASHERS (2) .
1.
PULL BRACKET (3) AND ASSOCIATED COMPONENTS AND WIRING HARNESS AWAY FROM JUNCTION BOX AS FAR
2.
AS CONNECTING HARNESS WILL ALLOW.
INSTALLATION OF BRACKET
POSITION BRACKET IN JUNCTION BOX.
1.
2. SECURE BRACKET WITH EIGHT SCREWS (1) AND WASHERS (2).
REMOVAL OF HEATER RELAY K2
REFER TO PARAGRAPH 3-19h FOR PRELIMINARY STEPS IN REMOVAL OF HEATER RELAY K2.
1.
2.
TAG AND DISCONNECT ELECTRICAL LEADS FROM RELAY (4).
3. REMOVE FOUR NUTS (5) AND PULL RELAY (4) FREE FROM BRACKET.
INSTALLATION OF HEATER RELAY K2
POSITION RELAY (4) ON BRACKET (3) AND SECURE WITH FOUR NUTS (5).
1.
2.
CONNECT ELECTRICAL LEADS TO APPROPRIATE TERMINALS ON RELAY (4). REMOVE TAGS FROM LEADS.
REFER TO PARAGRAPH 3-10h FOR FINAL STEPS IN INSTALLATION OF HEATER RELAY K2.
3.
REMOVAL OF COMPRESSOR START RELAY K1
REFER TO PARAGRAPH 3-10h FOR PRELIMINARY STEPS IN REMOVAL OF COMPRESSOR START RELAY K1.
1.
2. TAG AND DISCONNECT ELECTRICAL LEADS FROM RELAY (6).
REMOVE FOUR NUTS (7) AND PULL RELAY (6) FREE FROM BRACKET.
3.
INSTALLATION OF COMPRESSOR START RELAY K1
POSITION RELAY (6) ON BRACKET (3) AND SECURE WITH FOUR NUTS (7).
1.
2. CONNECT ELECTRICAL LEADS TO APPROPRIATE TERMINALS ON RELAY (6). REMOVE TAGS FROM LEADS.
3. REFER TO PARAGRAPH 3-10h FOR FINALS STEPS IN INSTALLATION OF COMPRESSOR START RELAY K1.
Figure 3-15. Removal and installation of relays (sheet 1 of 2)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals