Figure 3-20. Removal and installation of electrical receptacles J7, J3 and J2

TM 5-4120-356-14

REMOVAL OF ELECTRICAL RECEPTACLE J7

TS5-4120356-14/3-20

REMOVE FOUR SCREWS (1) AND NUTS (2) AND PULL ELECTRICAL RECEPTACLE J7 (3) FREE FROM CONTROL

BOX (4).

2. TAG AND DISCONNECT ELECTRICAL LEADS FROM ELECTRICAL RECEPTACLE J7 (3).

INSTALLATION OF ELECTRICAL RECEPTACLE J7

CONNECT ELECTRICAL LEADS TO PROPER TERMINALS ON RECEPTACLE J7 (3). REMOVE TAGS FROM LEADS.

2. POSITION RECEPTACLE J7 (3) IN CONTROL BOX (4) AND SECURE WITH FOUR SCREWS (1) AND NUTS (2).

REMOVAL OF ELECTRICAL RECEPTACLE J3

1. REMOVE FOUR SCREWS (5) AND NUTS (6) AND PULL RECEPTACLE J3 (7) FREE FROM JUNCTION BOX (11).

2. TAG AND DISCONNECT ELECTRICAL LEADS FROM RECEPTACLE J3 (7).

INSTALLATION OF ELECTRICAL RECEPTACLE J3

1. CONNECT ELECTRICAL LEADS TO PROPER TERMINALS ON RECEPTACLE J3 (7). REMOVE TAGS FROM LEADS.

2. POSITION RECEPTACLE J3 (7) IN JUNCTION BOX (11) AND SECURE WITH FOUR SCREWS (5) AND NUTS (6).

REMOVAL OF ELECTRICAL RECEPTACLE J2

1. REMOVE FOUR SCREWS (8) AND NUTS (9) AND PULL RECEPTACLE J2 (10) FREE FROM JUNCTION BOX (11).

2. TAG AND DISCONNECT ELECTRICAL LEADS FROM RECEPTACLE J2 ( 10).

INSTALLATION OF ELECTRICAL RECEPTACLE J2

CONNECT ELECTRICAL LEADS TO PROPER TERMINALS ON RECEPTACLE J2 (10). REMOVE TAGS FROM LEADS.

2. POSITION RECEPTACLE J2 (10) IN JUNCTION BOX (11) AND SECURE WITH FOUR SCREWS (5) AND NUTS (6).

Figure 3-20. Removal and installation of electrical receptacles J7, J3 and J2