Figure 4-8. Evaporator/Condenser Assembly Separation and Reconnection

TM 5-4120-359-14

Figure 4-8. Evaporator/Condenser Assembly Separation and Reconnection

a. Disassembly. (Separation of evaporator and condenser assemblies.)

(1) Using socket or combination wrench, remove four each hex head cap screws, lock washers, and flat washers

that hold the evaporator and condenser assemblies together.

(2) Disconnect the P9A plug.

(3) Disconnect the P2 plug.

(4) Using open end wrenches, carefully disconnect the low and high condenser to evaporator refrigerant metal

hose line connectors from the evaporator assembly half couplings.

(5) Carefully pull the evaporator assembly away from the condenser assembly.

4-39