Figure 4-39. Evaporator Electrical Module Assembly Removal/installation

TM 5-4120-359-14

a. Removal

(1) Disconnect P2A, P3, P4, and P6 connector plugs.

Figure 4-39. Evaporator Electrical Module Assembly Removal/installation

(2) Using screwdriver, loosen the two evaporator section electrical module mounting screws.

(3) Lift the electrical module up and out of the air conditioner.

b. Installation

(1) Place the electrical module in position and aline the module mounting screws.

(2) Using screwdriver, secure the module mounting screws.

(3) Connect the P2A, P3, P4, and P6 connector plugs.

Follow-on Procedures: 1. Install top evaporator cover. (See paragraph 3-21.)

2. Install air conditioner on shelter. (See paragraph 3-6.)

4-94