TOP COVER AND GROMMETS, EVAPORATOR ELECTRICAL MODULE

TM 5-4120-359-14

4-42. TOP COVER AND GROMMETS, EVAPORATOR ELECTRICAL MODULE

Preliminary Procedure: Remove evaporator section electrical module assembly. (See paragraph 4-41.)

a. Removal

(1) Using screwdriver, remove six screws and lock washers.

(2) Lift top cover off.

Figure 4-40. Top Cover and Grommets, Evaporator Electrical Module

b. Inspection

(1) Check that cover is not bent or punctured. Replace if damaged.

(2) Check that EMI gaskets are not cracked, loose, or missing. Repair or replace as needed.

Repair

(1) Remove and replace grommets if they are damaged.

NOTE

Prior to removal of the old gasket material, cut the new replacement material to

size using the old material as a sample.

4-95