|
| |
TM 5-4120-361-14
b. Repair. Repair any leaks.
Straighten bent fins.
Repair or replace
damaged tubing if possible.
Replace
coil if repair is not practical.
6-7.
Solenoid Valve.
a.
General.
Replaceable parts are
the coil bonnet assembly, diaphragm and
the preformed packing.
See figure 6-3.
b.
Coil Replacement.
Replace coil
as follows:
(1) Remove electrical connector
from solenoid valve leads.
(2) Remove nut on top of
housing.
Lifting housing and
sembly from bonnet assembly.
valve
coil as-
(3) Remove coil from housing.
(4) Install coil bottom plate with
edge upward.
(5) Install lower coil sleeve with
flange at bottom.
Install coil with
lead exits at bottom.
(6) Install coil spring with flat
edges upward and upper coil sleeve with
Figure 6-3.
Solenoid valve, exploded view
6-6
|
