|
| |
TM 5-4120-361-14
NOTE :
AFTER STARTING, ADJUST TEMPERATURE
SELECTOR SWITCH TO OBTAIN
DESIRED ENCLOSURE TEMPERATURE
STEP 1.
TURN VENT CONTROL ACTUATOR TO OPEN DAMPER DOOR.
STEP 2.
POSITION TABS TO PARTIALLY CLOSE INTAKE LOUVER BLADES.
STEP 3.
TURN MODE SELECTOR TO HIGH HEAT OR LOW HEAT FOR DESIRED
RANGE .
STEP 4.
ADJUST TEMPERATURE SELECTOR SWITCH TO DESIRED ENCLOSURE
STEP 5.
ADJUST AIR OUTLET LOUVERS TO DIRECT AIRFLOW AS DESIRED.
TEMPERATURE
TEMPERATURE.
NOTE :
AFTER TURNOFF, OPERATE IN VENT MODE
COOL OFF HEATING ELEMENTS.
(FIGURE 2-9) FOR 2 - 3 MINUTES TO
Figure 2-8.
Operating instructions for heating
2-12
|
