|
| |
TM 5-4120-361-14
STEP 1.
MAKE SURE CONDENSER COVER IS ROLLED UP.
STEP 2.
OPEN INTAKE LOUVERS BY LIFTING TABS.
STEP 3.
TURN VENT CONTROL ACTUATOR TO CLOSE VENTILATION DAMPER.
STEP 4.
TURN TEMPERATURE SELECTOR SWITCH TO MAXIMUM COUNTERCLOCKWISE POSITION (WARMER).
STEP 5.
TURN ON CONTROL CIRCUIT BREAKER.
STEP 6.
TURN MODE SELECTOR SWITCH TO LOW HEAT.
TURN TO HIGH IF MORE HEAT IS DESIRED.
Figure 2-7.
Starting instructions for heating
2-11
|
