Starting Instructions for Cooling

TM 5-4120-369-14

Starting Instructions for Cooling (See Figure 2-6). Start the air conditioner for

cooling as follows:

Roll up and tie condenser fabric cover.

Step 1.

Step 2.

Open intake louvers by lifting tabs.

Turn vent control actuator to close ventilation damper.

step 3.

Step 4.

Turn temperature selector switch to maximum counter clockwise position

(lowest cooling).

Turn ON compressor and control circuit breakers.

Step 5.

Turn mode selector switch to vent and allow fan to reach full speed, then

Step 6.

to cool.

Starting instructions for coding

2-12