 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4120-374-13
REMARKS
ACTION
LOCATION/lTEM
a. Inspect condenser fan, hub and setscrew for indication of
10. Condenser Fan
excessive wear or damage.
b. Replace condenser fan if damage to hub or condenser fan is
indicated.
c. Replace setscrew with a 1/4-28UNF-3A X .312 inch long
setscrew if damage is indicated.
Install condenser fan on fan motor shaft.
11. Condenser Fan
a.
b.
Tighten setscrew in condenser fan hub.
c.
Slide fan motor back into place on motor mounting bracket.
Secure fan motor to motor mounting bracket with four (4)
d.
capscrews and self-locking nuts.
FRONT OF HOUSING
12. Circulating Fan
a. Carefully install circulating fan on fan motor shaft.
b. Tighten setscrew in circulating fan hub.
13. Blower Intake Ring a. Align holes in blower intake ring with holes in circulating fan
housing.
b. Secure blower intake ring with seven (7) screws.
4-35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals