|
| |
TM5-4120-376-14
4-17. EVAPORATOR FAN MOTOR AND HOUSING ASSEMBLY/Inspect, Service, Test, Repair,
Replace (Cont)
LOCATION/ITEM
1. Remove one screw (48) one star washer (49) and one clamp (50) from evaporator fan motor
housing (57).
2. Remove four screws (51), four flat washers (52) four star washers (53) and four lock nuts
(54) from end plates (55).
3. Lightly tap long end of motor shaft with rubber hammer to remove rotor (56) from motor
housing (57).
4. Remove four screws (58) and four star washers (59) securing thermal overload (60) to
motor housing (57).
5. Pull thermal overload and mounting block (61) away from evaporator motor end plate (55)
to gain access to terminals.
6. Unsolder terminals in accordance with Appendix E.
7. Remove and replace thermal overload.
4-66
Repair:
|
