|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/Inspect, Test, Replace (Cont)
LOCATION/ITEM
Removal:
3. Remove two screws (14) securing wires to terminals on circuit breaker (CB2) (15).
4. Tag and remove wires from terminals on circuit breaker.
5. Remove retaining nut (16) and washer (17) securing circuit breaker to control module
mounting plate.
6. Remove circuit breaker (CB2).
Circuit Breaker (CB1) (Compressor)
1. Remove pin (18) and two spacers (19) from circuit breaker arm.
2. Tag and remove wires from terminals on circuit breaker.
3. Remove six screws (21) and six flat washers (22) securing circuit breaker to control
module mounting plate (23).
4. Remove circuit breaker (CB1).
Evaporator Fan Sp eed Switch (S-2)
1. Tag and remove wires from terminals on evaporator fan speed switch (S-2).
2. Remove retaining nut (25) and washer (26) securing evaporator fan speed switch (S-2) (24)
to control module mounting plate.
3. Remove evaporator fan speed switch (S-2).
Mode Selector Switch (S-1)
1. Loosen two set screws (27) on mode selector knob (28).
2. Remove mode selector knob.
3. Tag and remove wires from terminals on mode selector switch (S-1) (29).
4. Remove one retaining nut (30) and one lock washer (31) securing mode selector switch to
control module mounting plate.
5. Remove mode selector (S-1).
4-98
|
