|
| |
TM5-4120-376-14
4-22. JUNCTION BOX AND CONTROL MODULE ASSEMBLY/Inspect, Test, Replace (Cont)
LOCATION/ITEM
Removal:
Temperature Selector (S-3)
1.
2.
3.
4.
5.
plate
6.
7.
Loosen two set screws (32) on control module knob (9).
Remove control module knob.
Loosen set screw (33) on temperature selector knob (35).
Remove temperature selector knob.
Remove eight screws (36) and eight flat washers (37) securing control module mounting
(38) and control module designation plate (39) to four posts (40).
Remove control module mounting plate and control module designation plate.
Remove one screw (41) one flat washer (42) one lock nut (43) and one clamp (44) securing
sensor bulb to control module mounting frame.
8. Remove three screws (45) three flat washers (46) and three lock nuts (47) securing
temperature selector (S-3) (34) to control module mounting frame.
9. Remove two screws (48) securing terminals to thermostat (S-3).
10. Tag and remove wires from terminals.
11. Remove temperature selector.
4-99
|
