|
| |
TM5-4120-376-14
4-24. HEATER, TRANSFORMER, RECTIFIER AND RELATED PARTS/Inspect, Test, Replace
(Cont)
LOCATION/ITEM
Installation:
6. Slide thermostat sensor bulb (10) thru junction box (14) to left evaporator fan housing (11).
7. Secure thermostat sensor bulb to left evaporator fan housing with two clamps (9) two lock
washers (8) and two screws (7).
8. Slide control module (13) into junction box.
9. Secure control module to junction box with knob (12).
10. Align front louver (evaporator inlet) (6) with holes in housing and secure with ten screws
(4) and ten lock washers (5).
11. Align front cover (2) with holes in center cover (3) and housing and secure with fourteen
screws (1).
Removal:
Capacitor (C-1) and (C-2)
Unsolder leads from capacitor in accordance with Appendix E and tag wires.
4-150
|
