|
| |
TM5-4120-376-14
4-26. HOUSING ASSEMBLY/Repair, Replace (Cont)
LOCATION/ITEM
Replace:
1. Drill out rivets (1) and remove plate nut (2).
2. Align new plate nuts (2) and new rivnuts (3) with holes in housing and insert with hammer.
WARNING
Acetone and mehyl-ethyl ketone (MEK) are flammable and their vapors are
explosive. Prolonged or repeated inhalation of fumes on contact with the skin
can be toxic. Use in a well ventilated area, wear gloves and keep away from
sparks or flame.
3. Scrape and pull off as much of the damaged insulation and gaskets as possible.
4. Soften the remaining insulation and adhesive with acetone (Table D-1, Item 1) or methyl-
ethyl ketone (MEK) (Table D-1, Item 7).
4-159
|
