|
| |
TM5-4120-376-14
4-26. HOUSING ASSEMBLY/Repair, Replace (Cont)
LOCATION/ITEM
Installation:
12. Align fabric
lock washers (2).
cover (3) with holes in housing and secure with three screws (1) and three
CONDENSER FAN HOUSING
Removal:
Right Side
1. Remove three screws (1) and three lock washers (2) and fabric cover
and housing.
2. Remove fourteen screws (5)
and rear cover (4) from housing.
3. Remove condenser louver
cable actuator in accordance
with paragraph 5-18, page 5-24.
4. Remove control cable assem-
bly in accordance with paragraph
5-18, page 5-24.
5. Remove ten screws (7) and
ten lock washers (8) and front
louver (evaporator inlet) (9)
from housing.
6. Remove condenser fans, motors
and support assemblies in
accordance with paragraph 4-15,
page 4-39.
(3) to rear cover (4)
4-165
|
