|
| |
TM5-4120-376-14
4-14. CONDENSER GUARD, COVERS, VENTILATION AIR FILTER AND LIFTING
RINGS/Inspect, Service, Repair, Replace (Cont)
LOCATION/ITEM
Inspection:
Inspect for damage and replace if damaged.
Installation:
1. Align lifting ring and clips (10) with holes in housing and secure lifting ring and clips to
housing with three bolts (7) three lock washers (8) and three flat nuts (9).
2. Align ventilation guard (6) with holes in housing and secure ventilation guard to housing
with four screws (4) and four lock washers (5) to housing.
3. Align front louver (evaporator inlet) (3) with holes in housing and secure with ten screws
(1) and ten lock washers (2) to housing.
4-38
|
