|
| |
TM5-4120-376-14
4-14. CONDENSER GUARD, COVERS, VENTILATION AIR FILTER AND LIFTING
RINGS/Inspect, Service, Repair, Replace (Cont)
LOCATION/ITEM
LIFTING RING AND CLIP (Front and Left Rear)
Removal:
1. Remove ten screws (1) ten lock washers (2) and front louver (evaporator inlet) (3) from
housing.
2. Remove four screws (4) four lock washers (5) and ventilation guard (6) from housing.
3. Remove three bolts (7) three lock washers (8) and three flat nuts (9) and lifting rings and
clips (10) from housing.
4-37
|
