SERVICE UPON RECEIPT OF MATERIAL

TM5-4120-383-14

4-3.

SERVICE UPON RECEIPT OF MATERIAL.Continued

NOTE

The shipping container is of such a design that it

may be retained for reuse for mobility purposes if

frequent relocation of the air conditioner is

anticipated.

(2) Remove Shipping Container. Cut the metal bands that hold

Lift the container

the top and sides of the container to the base.

vertically and remove it from the base and cabinet.

(3) Remove Packaging. Remove the cushioning around the top

of the cabinet and retain, if reuse is anticipated. Remove the

preservation barrier by tearing around the bottom of the cabinet.

Remove the technical publications envelope and accessory sack that

are taped to the cabinet and put them in a safe place.

NOTE

It is recommended that the cabinet be left bolted to

the shipping pallet until time to place it in the

installation position. All receiving inspection

actions can be conducted without removal from the

pallet.

Receiving Inspection.

Perform receiving inspection of the

air conditioner in the following manner:

(1) Inspect the equipment for damage incurred during

If the equipment has been damaged, report damage on DD

shipment.

Form 6, Packaging Improvement Report.

(2) Check the equipment against the packing slip to see if

the shipment is complete. Report all discrepancies in accordance

with the instructions of DA Pamphlet 738-750 (The Army Maintenance

Management System).

(3) Check to see whether the equipment has been modified.

NOTE

The unit weight (less shipping pallet) is 185 pounds

(83.9 kg). When lifting or moving the unit on the

shipping pallet, a forklift may be used. When

lifting the unit into position use four people, one

at each lifting handle.

4-8