INSTALLATION INSTRUCTIONS.-Continued

TM5-4120-384-14

4-4.

INSTALLATION

INSTRUCTIONS.-Continued

Use care to avoid damage to sensing

control module out of unit.

line.

(d)

Carefully

work

sensing

bulb

through

frame

and

out

the

unit.

Determine where control module is to be located.

Note

(e)

that the sensing bulb controls the thermostatic action of the

It should be mounted where a true room or

TEMPERATURE SELECTOR.

Do not place near heat or

enclosure temperature will be indicated.

A false temperature control would result.

cool producing items.

(f)

Secure

control

module

and

sensing

bulb.

(g) The receptacle and plug needed to fabricate the

interconnecting cable are provided with unit.

Determine length of

wire needed to connect plug and receptacle between unit and control

module.

(h) See interconnecting remote control cable wiring

diagram, figure 4-4 sheet 4 and fabricate the interconnecting

This cable will connect between P2A/B and J2A/B.

cable.

(i)

Connect

cable.

Install

return

air

louver

(para

4-13).

(j)

(3) No other preparation is necessary if the air conditioner

is to be installed by the typical exterior wall opening method and

operated as a self-contained unit.

4-12