 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-4120-384-14
5 - 6 . SCREENS, GUARDS, AND LOUVERS.-Continued
Acetone and methyl-ethyl ketone (MEK) are flammable
Repeated or
and their vapors can be explosive.
prolonged skin contact or inhalation of vapors can be
Use a well-ventilated area, wear glove, and
toxic.
keep away from sparks or flame.
(2) Soften and remove old adhesive and gasket residue,
using
acetone or methyl-ethyl ketone (MEK) and a stiff brush.
(3) Coat mating surfaces of metal and gasket with adhesive.
Let both surfaces air dry until adhesive is tacky but will not
stick to fingers.
(4) Starting with an end, carefully
attach
gasket
to
metal.
Press into firm contact all over.
(5) Minor dents and bent edges
can
be
straightened
using
c o m m o n sheet metal repair procedures.
(6)
Straighten
slightly
bent
louver
blades
by
hand.
(7)
Should
touch
up
or
refinishing
be
necessary,
see
TM
43-
0139.
Replace screens, guards, or louvers that
are
badly
Replace.
b.
dented or bent or screens that are punctured or torn.
INFORMATION PLATES.
5-7.
See figure 2-3 for location
and
information
contained
on
Warning
and instruction plates.
Replace.
If any plates
are
missing,
damaged,
or
illegible,
they
should be replaced.
Use
a
drill
stop
Remove old plate by drilling rivets out.
a.
or similar tool to avoid damage to internal parts.
Install
new
plate
with
proper
size
rivets.
b.
5-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals