 |
|||
|
|
|||
|
Page Title:
EVAPORATOR FAN AND HOUSING-Continued. |
|
||
| ||||||||||
|
|
 TM 5-4120-386-14
4-30. EVAPORATOR FAN AND HOUSING - Continued.
REMARKS
ACTION
LOCATION/ITEM
Assembly-
Continued
Industrial sealant (Item 28, App. D)
is extremely flammable. The vapors
given off from this product can
easily be ignited. Contains methyl-
ethyl ketone (MEK), methyl isobutyl
ketone (MIBK) and asbestos (bound).
Keep product and its vapors away
from heat, sparks and open flames.
Use only in a well ventilated area
with enough air movement to remove
vapor and prevent vapor build up.
Avoid prolonged breathing of
vapor. Avoid eye contact.
Avoid prolonged or repeated
skin contact.
b. Seal the outer edge of the
inlet rings (14 and 19) to
flanges (27 and 31) using
industrial sealant (Item 28,
(Item 29, App. D).
c. Install inlet ring (19) and
flange (31) to base using
two screws and two nuts.
d. Insert motor shaft extension
(39) into impeller (35).
e. Tighten impeller setscrew (36)
on motor shaft extension (39).
f.
Install motor shaft extension
(39) and impeller (35) onto
motor shaft.
g. Install housing (37) to connect
with flange (31 ) and inlet ring
(19).
h. Install inlet ring (14) and
flange (27) onto housing (37)
and base (40) using two screws
(25) and two nuts (26).
4-77
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals