|
|
TM 5-4120-386-14
5-6. INFORMATION PLATES-Continued.
LOCATION/ITEM
ACTION
REMARKS
Removal-Continued
8. Vent Open
Using a flathead screwdriver,
Decal
remove the vent open decal
(10) from the right front of
the air conditioner (beneath
vent damper actuator wheel).
9 . Identification
Plate
Disconnect air conditioner power
supply before doing maintenance
work on or near electrical
components or junction box com-
part ment.
a.
Remove front top cover (20).
(See paragraph 4-17.)
Remove junction box (15).
b.
(See paragraph 4-25.)
When removing or installing
Identification Plate be careful
not to damage any components in the
junction box compartment.
c.
using a 1/8" diameter drill,
remove four rivets (1) from
identification plate (2) and
housing.
10. Danger Plate
Disconnect air conditioner power
supply before doing maintenance
work on or near electrical components
or in junction box compartment.
Remove front top cover (20).
a.
(See paragraph 4-17.)
b.
Remove junction box (15).
(See paragraph 4-25.)
5-15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |