|
| |
TM5-4120-387-14
a.
Removal
(1) Rotate turnbutton fasteners and remove two straps.
(2) Roll cover down and close zipper.
(3) Using screwdriver, remove eight screws and flat washers from the sides.
(4) Using screwdriver, remove four screws, four flat washers, and four rain
seal washers from the top.
(5) Carefully remove the cover.
b.
Cleaning
(1) Wipe clean with rag and mild detergent solution.
(2) Thoroughly rinse with fresh water and dry.
c .
Lubrication
(1) Lubricate zipper with silicone type lubricant or a wax stick.
(2) Lubricate turnbutton fasteners with silicone type lubricant or light
oil.
d.
Inspection/Repair
(1) Inspect for rips, cuts, tears, or punctures in the fabric.
(2) Inspect for damaged, loose, or missing eyelets and snap fasteners.
(3) Refer repair to your supervisor.
e.
Installation
(1) Aline eyelets to casing mounting holes.
(2) Using screwdriver, secure top of fabric cover with four screws, four
flat washers, and four rain seal washers.
(3) Secure sides with ten screws and flat washers.
(4) If the air conditioner is to be returned to normal operation, open the
turnbutton fasteners, roll up the back flap, and secure it with the stowing straps
and turnbutton fasteners.
NOTE
If air conditioner installation requires removal of cover,
reinstall mounting screws, washers, and rain seal washers.
This will protect threads in the casing and prevent water
leaks.
4-52
|
