|
| |
TM5-4120-387-14
4-14. CBR (CHEMICAL, BIOLOGICAL, RADIOLOGICAL) DUCT COVER
Figure 4-10. CBR Duct Cover
a. Removal
(1) Using screwdriver, remove five screws,
five flat washers and five lock
washers.
(2) Remove cover.
b.
Inspection
(1) Check that cover is not bent, cracked, or punctured. If damaged,
notify your supervisor and Direct Support Maintenance.
(2) Check that gasket is not torn, loose, or missing. Refer repair/re-
placement to your supervisor and Direct Support Maintenance.
c.
Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with five screws, five flat
washers and five lockwashers.
4-53
|
