|
| |
TM5-4120-387-14
4-15. ACCESS (CHARGING VALVES) COVER
Figure 4-11. Access (Charging Valves) Cover
a.
Removal
(1) Using screwdriver, remove six screws.
(2) Remove cover.
b.
Inspection
(1) Check that cover is not bent, cracked, or punctured.
(2) Check that gasket is not torn, loose, or missing.
(3) Check that information plate is readable and in place.
(4) Refer all repairs to your supervisor and Direct Support Maintenance.
c.
Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with six screws.
4-54
|
