| |
TM5-4120-387-14
a.
Removal
(1) Using screwdriver, remove two screws.
(2) Remove plate.
b.
Inspection
(1) Check that plate is not bent, cracked, or punctured. If plate is
damaged, notify your supervisor and Direct Support Maintenance.
(2) Check that gasket is not torn, loose, or missing. Refer repair/
replacement to your supervisor and Direct Support Maintenance.
c .
Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure plate to casing with two screws.
4-18. EVAPORATOR AIR DISCHARGE (OUTLET) GRILLE ASSEMBLY
Voltages used can kill.
Always disconnect power cord to air
conditioner before performing any internal maintenance.
Shutting unit off at its control panel does not disconnect
unit power.
4-57
|