| |
TM5-4120-387-14
Figure 4-14. Evaporator Discharge (Outlet) Grille Assembly
(1) Using screwdriver,
remove four screws and washers.
(2) Remove grille.
b.
Cleaning.
Wipe or vacuum all dust and dirt off louvers and inside of
grille.
Be careful not to damage gasket strips.
c.
Inspection/Repair
(1) Inspect each grille for general condition and proper operation.
(2) Bent louvers can usually be straightened with fingers.
(3) Refer requirements for further repair to your supervisor and Direct
Support Maintenance.
4-58
|