|
| |
TM5-4120-387-14
a.
Figure 4-16. Condenser Air Discharge Guard
Removal
(1) Using screwdriver, remove eight screws,
lockwashers and flat washers
from guard.
(2) Remove guard.
b.
Inspection.
Check that guard is not bent or broken.
If damaged. refer
repair to your supervisor and Direct Support Maintenance.
c.
Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure guard to casing with eight screws,
lockwashers and flat washers.
Follow-on procedure: Connect power cord.
4-61
|
