|
| |
TM5-4120-387-14
4-21. CONDENSER COIL GUARD
Figure 4-17. Condenser Coil Guard
a.
Removal
(1) Using screwdriver, remove eight screws and flat washers from guard
assembly.
(2) Remove guard.
b.
Inspection. Check
damaged, refer repair to
c.
Installation
that guard is not bent, cracked, or otherwise damaged. If
your supervisor and Direct Support Maintenance.
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure guard assembly to casing with eight screws
and flat washers.
4-62
|
