| |
TM5-4120-387-14
4-22. FRESH AIR (INLET) SCREEN
Figure 4-18. Fresh Air (Inlet) Screen
a.
Removal
(1) Using screwdriver, remove five screws, lockwashers, and flat washers.
(2) Remove screen.
b.
Inspection
(1) Check that screen is not bent, punctured, cracked, or otherwise damaged.
(2) If damaged, refer repair to your supervisor and Direct Support
Maintenance.
c .
Installation
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure screen to casing with five screws,
lockwashers and flat washers.
4-63
|