|
| |
TM5-4120-387-14
Figure 4-24. Junction Box Removal/installation
(10) Using screwdriver, loosen four panel fastener screws in junction box
cover.
Remove cover.
(11) Using wrench and screwdriver, remove nut and two washers from
grounding stud.
(12) Tag and remove ground wires.
(13) Loosen two screws on two clamps holding capacitor C4 and remove
capacitor.
(14) Using screwdriver, remove four screws that secure control panel to
junction box.
(15) Remove junction box.
4-72
|
