|
| |
TM5-4120-387-14
Figure 4-36. Terminal Boards (TB1 and TB2)
b.
Inspection
(1) Check terminal boards for loose or corroded terminals, cracks, and
obvious damage.
(2) Check that wire leads are secure and properly located. (See fig. 4-7.)
c .
Removal
(1) Remove junction box. (See para 4-29.)
(2) Tag and disconnect wire leads.
(3) Using screwdriver and wrench, remove four screws and nuts from terminal
board (TB1).
(4) Using screwdriver and wrench, remove two screws and nuts from terminal
board (TB2).
(5) Remove terminal boards (TB1 and TB2).
d.
Installation
(1) See tags and wiring diagram (fig. 4-7) and connect wire leads.
(2) Remove tags.
4-95
|
