|
| |
TM5-4120-387-14
a.
Access
(1) Using screwdriver, loosen four captive panel fastener screws in
junction box cover.
(2) Remove cover.
b.
Inspection
(1) Check that cover is not bent or punctured. Replace if damaged.
(2) Check that gaskets are not cracked, loose, or missing and the plate is
in place and legible.
Replace gasket as required.
(3) Check junction box housing for cracked welds and loose or missing
hardware.
Replace or repair as required.
c.
Disassembly/Reassembly.
See paragraphs 4-29 thru 4-41 for removal/instal-
lation of parts.
d.
Installation.
Using screwdriver, secure junction box cover with four
captive panel fastener screws.
Follow-on procedure:
Install junction box.
(See para 4-29.)
4-42. CIRCUIT BREAKER EXTERNAL RESET CONTROL
Preliminary procedure: 1.
Remove condenser air discharge guard. (See para 4-20.)
2.
Remove junction box.
(See para 4-29.)
Figure 4-38. Circuit Breaker External Reset
4-97
|
