Section II EQUIPMENT DESCRIPTION AND DATA

TM 5-4120-393-14

1-9. Equipment Characteristics, Capabilities, and Features. The F60T-2S and F60T-2HS are designed to ventilate,

cool or heat and to filter and circulate air in enclosures.

a. Provides a maximum of 60,000 BTU/HR of cooling and 47,000 BTU/HR of heating.

b. Has two stages of heat.

c. Provides a source of filtered outside (fresh) ventilation air.

d. Is self contained in a single cabinet that is suited for van, shelter or other enclosed areas.

e. Operates in environmental conditions from arctic to tropic.

f. Is fully portable.

g. Has connection point for CBR (chemical, biological, radiological) filter.

h. Is designed for low-noise level operation.

i. Has alternate power input connection locations to provide for a variety of installations.

j. The control panel may be removed from the unit and remote mounted.

NOTE

When control panel is remote mounted, a block off panel must be used on the air

conditioner. The block off panel must be ordered separately. Interconnecting

cables must also be fabricated. See installation instructions (para 4-7) for

additional information.

k. The F60T-2HS model is equipped with a high speed fan and motor that allows use with fixed or flexible ducts to

distribute the conditioned air.

l. An accessory 16 inch flexible duct adapter is available for use with the model F60T-2HS.

NOTE

The 16 inch flexible duct adapter, when used, is mounted in the same location as

the conditioned air inlet and outlet grilles.

Change 4 1-3