Remote Mounting of Control Panel

TM 5-4120-393-14

(1) Remote mounting of control panel. See para 4-7.

(2) Cable connections through return air duct. See para 4-8.

(3) Alternate input power cable connections. See par a 4-9.

(4) Installations that require removal of fabric cover. See para 4-10.

4-7. Remote Mounting of Control Panel. This paragraph is only applicable if the control panel is to be removed from

the unit and installed in a remote location.

WARNING

Be sure input power is disconnected before doing any work inside the air

conditioner cabinet. Voltages used can kill.

a. Remove Grille. Using screwdriver, remove twelve screws (1) and flat washers (2). Remove conditioned air

intake grille (3). Be careful not to damage grille gaskets.

b. Remove Lower Panel. Using screwdriver loosen three captive screws (1). Tip top of panel (2) away from unit

and lift panel up and away from unit. Be careful not to damage panel gaskets.

4-7