Cable Connections Through Return Air Duct (Cont)

TM 5-4120-393-14

(2) Unscrew electrical connector cover (1).

(3) Using screwdriver and wrench, remove four screws (2) and nuts (3) from J1 connector (4).

(4) Pull J1 connector (4) free.

(5) Remove rubber gasket (5). Store electrical connector cover and chain (1) in a safe place for possible future

use. All other parts will be reused.

(6) Remove P25 connector (1) from dummy storage connector (4).

(7) Using screwdriver and wrench, remove four screws (2) and nuts (3) and remove dummy storage connector

(4) and plate (5).

(8) Store dummy storage connector (4) in a safe place. All other parts will be reused.

(9) Using screwdriver and wrench, install J1 connector (1) in old dummy connector location using four each

screws (2) and nuts (3).

(10) Connect P25 connector (4) to J1 connector (1).

(11) Using screwdriver and wrench, install gasket (1) and plate (2) at old J1 connector location with four each

screws (3) and nuts (4).

4-11