|
| |
TM 55-8145-221-14&P
REFRIGERATED CONTAINER SYSTEM
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES
0018 00
GENERAL.
a. The Preventive Maintenance Checks and Services presented in Table 1 lists the inspections and care of your
equipment required to keep it in good operating condition and ready for its primary mission.
b. When a check and service procedure is required for both weekly and monthly intervals, it is not necessary to do
the procedure twice if the equipment is operated during the weekly period.
WARNINGS AND CAUTIONS.
Always observe the WARNINGS and CAUTIONS appearing in the PMCS table. Warnings and cautions appear
before applicable procedures. You must observe WARNINGS and CAUTIONS to prevent serious injury to yourself
and others or prevent your equipment from being damaged.
PMCS TABLE.
Refer to Table 1 for Preventive Maintenance Checks and Services.
NOTE
Be sure to observe all special information and notes that appear in your table.
a. Item Number Column. Numbers in this column are for reference. When completing DA Form 2404 (Equipment
Maintenance and Inspection Worksheet), include the item number for the check/service indicating a fault. Item
numbers also appear in the order that you must do checks and services for the intervals listed.
b. Interval Columns. This column tells you when you must do the procedure in the procedure column. WEEKLY
procedures must be done during the seven day operating period. MONTHLY procedures must be done during the
time you are operating or using the equipment for its intended mission.
c. Location, Check/Service Column. This column provides the location and the item to be checked or serviced. The
item location is underlined.
d. Procedure Column. This column gives the procedure you must do to check or service the item listed in the
Check/Service column to know if the equipment is ready or available for its intended mission or for operation.
You must do the procedure at the time stated in the interval column.
e. Not Fully Mission Capable If: Column. Information in this column tells you what faults will keep your equipment
from being capable of performing its mission. If you make check and service procedures that show faults listed in
this column, do not operate the equipment. Follow standard operating procedures for maintaining the equipment
or reporting equipment failure.
0018 00-1
Change 1
|
