|
| |
TM 55-8145-221-14&P
Change 1
0021 00-8
REFRIGERATED CONTAINER SYSTEM
GENERATOR SET REPLACEMENT – Continued
0021 00
INSTALLATION – Continued.
CAUTION
When generator set is returned to the stowed position, fuel hose and power cable must be kept clear of the
slides. Fuel hose and power cable could be damaged if pinched in slide.
9. Using two personnel, release retention latches (19) simultaneously and carefully push generator set (1) back into stowed
position until retention latches lock. If exhaust pipe (20) makes contact with vertical exhaust shield (21), perform the
following steps:
a. Hold horizontal exhaust pipe (20) down far enough to clear vertical shield (21) and tighten exhaust nuts (22).
b. Push generator set (1) into stowed position until retention latches (19) lock.
10. Install two generator locking bolts (23).
Figure 3. Generator Set Installation (Sheet 4 of 4)
1
19
23
22
20
21
END OF WORK PACKAGE.
|
