|
| |
TM 55-8145-221-14&P
0033 00-3/4 blank
ESCAPE DOOR – Continued
0033 00
ASSEMBLY.
1.
Position two each gasket strips (7) (Item 9, WP 0079 00) and (8) (Item 9, WP 0079 00) over studs (9) on exterior frame
(6). Mark location of studs on gaskets. Cut holes in gaskets to match location of studs.
2.
Remove protective backing from gasket strips (7 and 8). Install gasket strips on exterior frame (6).
3.
Position two each gasket strips (7) (Item 9, WP 0079 00) and (8) (Item 9, WP 0079 00) over interior frame (4). Cut
gaskets to match location of holes in frame.
4.
Remove protective backing from gaskets (7 and 8). Install gaskets on interior frame (4).
INSTALLATION.
1.
Align studs (9) with holes in right door (1) and push exterior frame (6) into door.
2.
Install escape panel (5) over studs (9) on exterior frame (6).
3.
Install interior frame (4) over escape panel (5). Make sure gasket strips (7 and 8) are facing escape panel.
4.
Install six flat washers (3) and handles (2).
5.
Close right door (1).
END OF WORK PACKAGE.
|
