|
| |
TM 55-8145-221-14&P
0038 00-3/4 blank
FRONT PANEL – Continued
0038 00
REPAIR.
1.
Replace defective components.
2.
If damaged, repair front panel (reference WP 0038 00).
ASSEMBLY.
1.
Apply a bead of sealant (Item 3, WP 0078 00) along the mating surfaces and around each hole of each angle plate before
installation.
2.
Position angle plates (9, 10, 11 and 13) on outside of front panel (8).
3.
Install 22 liner rivets (2) (Item 12, WP 0081 00) to secure angle plates (9, 10 and 11) to front panel (8).
4.
Install twelve screws (12) to secure angle plate (13).
5.
Position angle plates (3, 4, 6 and 7) on inside of front panel (8).
6.
Install twenty liner rivets (2) (Item 12, WP 0081 00) to secure angle plates (3 and 4) to front panel (8).
7.
Install twelve liner rivets (5) (Item 17, WP 0081 00) to secure angle plates (6 and 7) to front panel (8).
8.
Apply sealant (Item 3, WP 0078 00) along edges and seams of angle plates (3, 4, 6, 7, 9, 10, 11 and 13).
9.
Install adapter (14) (Item 1, WP 0081 00) on conduit (15) (Item 4, WP 0079 00) using PVC cement (Item 4, WP 0078
00).
10. Install adapter (14) and conduit (15) into wall (8) from inside the container. Seal around adapter with sealant (Item 3,
WP 0078 00).
11. Install terminal adapter (16) (Item 24, WP 0081 00) on conduit (15) using PVC cement (Item 4, WP 0078 00). Seal
around terminal adapter with sealant (Item 3, WP 0078 00).
END OF WORK PACKAGE.
|
