REMOVE/SERVICE/INSTALL PILOT LIGHT COVER.

TM 9-4110-241-13

TO 35E9-274-1

4-21. REMOVE/SERVICE/INSTALL PILOT LIGHT COVER.

a. Tools: Screwdriver, cross-tip.

b. Removal: Remove screws and remove pilot light cover.

c. Service: Wipe red jewel with a clean cloth. Use a brush to remove stubborn dirt.

d. Inspect socket:

Visually inspect socket for cracking, breaks, or scorching.

Inspect for loose or missing

hardware.

e. Installation: Position pilot light cover over pilot light socket and mount with screws.

4-22. (MODELS M600PF, M1200PFA, AND AA4000PF). INSPECT/REPLACE PILOT LIGHT BULB.

NOTE

PRELIMINARY PROCEDURE: Pilot light cover removal (para. 4-21).

a. Inspect: Visually check to see if bulb is burned out.

b. Replace: Unscrew old bulb from socket and screw in replacement bulb.

NOTE

FOLLOW-ON MAINTENANCE: Install pilot light cover (para. 4-21.)

Figure 4-16. Pilot Light Cover and Bulb (Models AA600PF, AA1200PFA, and AA4000PF)

4-37