Figure 4-18. Pilot Light Housing Assembly (Models MDSI600N, TKR-600C, and TKR-4000C)

TM 9-4110-241-13

TO 35E9-274-1

4-24.

(MODELS MDS1600N, TKR6OOC0, AND TKR4000C).

REMOVE/INSTALL PILOT LIGHT HOUSING

ASSEMBLY

a. Tools: Screwdriver, flat-tip; Multimeter.

b. Removal:

WARNING

Disconnect power to power receptacle before beginning this procedure.

(1) Remove switch cover and switch assembly.

(2) Carefully pull out switch assembly from door frame panel assembly.

(3) Tag and disconnect wires from switch assembly; remove pilot light housing assembly.

Figure 4-18. Pilot Light Housing Assembly (Models MDSI600N, TKR-600C, and TKR-4000C)

c. Installation:

(1) Connect replacement pilot light housing assembly wires.

(2) Position switch and switch plate assembly onto door frame panel assembly.

(3) Reconnect power supply cord to power receptacle.

CHANGE 1 4-39/(4-40 blank)